Cisco Systems 10200 User Manual Page 80

  • Download
  • Add to my manuals
  • Print
  • Page
    / 214
  • Table of contents
  • BOOKMARKS
  • Rated. / 5. Based on customer reviews
Page view 79
5-4
Cisco BTS 10200 Softswitch Operations and Maintenance Guide, Release 6.0.x
OL-16000-07
Chapter 5 Managing External Resources
Managing Trunk Groups and Trunks
Resetting trunks
reset trunk-termination tgn-id=13; cic=1-6;
Resetting does the following:
Clears all manual and blocked states
Clears active/transient calls on a trunk termination, with the
exception of SS7 trunk terminations.
Brings trunks INS
Changing trunk states
control trunk-termination tgn-id=17; cic=1-23;
target-state=ins; mode=forced;
equip trunk-termination tgn-id=13; cic=all;
Changes trunks in UEQP to OOS
unequip subscriber-termination [email protected];
Changes OOS trunks to UEQP
Forcing MAINT state SS7 trunks
control ss7-trunk-termination tgn-id=103; mode=forced;
target-state=maint;
Note Set COT on the terminating gateway or switch to perform
these tests. Otherwise, the test or tests fail.
ISDN trunks
control isdn-trunk-termination tgn-id=17; mode=forced;
target-state=maint;
CAS trunks
control cas-trunk-termination tgn-id=64; mode=forced;
target-state=maint;
Announcement trunks
control annc-trunk-termination tgn-id=13; mode=forced;
target-state=maint;
Table 5-2 Managing Trunk Groups (continued)
Task Sample Command
Page view 79
1 2 ... 75 76 77 78 79 80 81 82 83 84 85 ... 213 214

Comments to this Manuals

No comments