Part Number: OL-7723-01Cisco SFS 7000 InfiniBand Server SwitchQuick Start Guide (Topspin 120 Quick Start Guide)Release 2.2.0 Update 1Product ID: 14026
xiProduct RegistrationTHANK YOU FOR PURCHASING YOUR TOPSPIN® PRODUCTTopspin Communications is pleased that you have selected Topspin for your computin
xii• Email: [email protected]• Phone: (800) 499-1473• Online Help Desk: http://support.topspin.com
xiiiTerms and Conditions of Sale for Topspin Communications, Inc.PLEASE READ THESE TERMS AND CONDITIONS CAREFULLY BEFORE USING THE PRODUCTS THAT ARE P
xivprice or subsequently invoiced to the Customer. In the event Topspin is required to pay any such tax, duty or charge, Customer will promptly reimbu
xvCustomer must provide written notice to Topspin within thirty (30) days of delivery in the event that Products do not conform to the quotation made
xviSTATES/JURISDICTIONS DO NOT ALLOW THE EXCLUSION OF IMPLIED WARRANTIES SO THE ABOVE EXCLUSIONS MAY NOT APPLY TO CUSTOMER. TOPSPIN'S LIMITED WAR
xviiassign or delegate this Agreement or any rights or obligations hereunder, whether voluntarily, by operation of law or otherwise, without the prior
xviii
xixTopspin Limited End User WarrantyTopspin provides the following limited warranty (“Limited Warranty”) for Topspin products:• For a period of (1) ye
Copyright © 2004 - 2005 Topspin Communications, Inc. All rights reserved.The Topspin Switched Computing System, Topspin Host Channel Adapter, Topspin
xxHow to Obtain Warranty ServiceTo obtain warranty service, the product must first be registered with Topspin as outlined above. Topspin must be notif
xxiDeclaration of ConformityTopspin Communications, Inc.515 Ellis St.Mountain View, CA 94043Phone: (650) 316-3300Fax: (650) 316-3269http://www.topspin
xxii
11Topspin 120 Quick StartThe following sections appear in this chapter:• “Prepare the Site” on page 1• “Mount the Chassis in a Rack” on page 1• “Confi
2• Any associated mounting clips to secure the brackets to your rack (2 for each rail of the rack)• A rack with enough clearance for the Topspin 120 s
3The standard method is to face the flange toward the front of the chassis. However, you can also mount the flange toward the back if you want to moun
45. Attach the remaining 2 rail brackets to your rack. a. Orient a rack bracket toward the back of the rack bracket with the flange facing away from t
58. Secure the switch with your screws through the front of the rack, as show in Figure 1-6.Figure 1-6: Secure switch with screws through the front of
64. Insert the switch into the rack with the rack brackets attached. You will have to tilt the switch unit to one side to avoid hitting the sides of t
7e. Enter the user name and password. The default user name is super, and the default password is super.f. Enter the enable command.g. Enter the confi
iiiRegulatory Notices... vFCC Statement...
8An integrated suite of drivers is provided, including IPoIB, SRP, SDP, uDAPL and MPI .a. Make sure your Linux kernel is supported. Contact the Techni
95. Plug InfiniBand cables from the host to the InfiniBand switch. a. To plug in an InfiniBand cable, push the connector into the interface until you
10NOTE: If your host does not provide an ample amount of free space around a given IB port, double-check that your IB cable connector engages fully. W
11(Optional) Launch the Chassis ManagerChassis Manager is a web-based GUI that can be used to manage a single InfiniBand chassis. Prepare Your DeviceT
124. Type the Management IP address of your Server Switch in the address field of your browser and press Enter.Figure 1-14: Web Browser WindowA log-in
13(Optional) Install the Element Manager GUIFor more information regarding the Element Manager tasks, refer to the InfiniBand User Guide.1. Check that
IndexCchassis managerlaunch 11Ddeclaration of conformity xxiEelement managerinstall 13HHTTP 11HTTPs 11Iinstalljava GUI 13ip http server 11Jjava GUIins
vRegulatory NoticesFCC StatementThis equipment has been tested and found to comply with the limits for a Class A digital device, pursuant to Part 15 o
viCAUTION: Grounding is supplied by the ground-prong on the 3-prong power cable. Do not attach a separate ground cable. Do not use adapter plugs. Do n
viiGeneral CautionsCAUTION: No user is authorized to remove the Topspin system enclosure cover. The internal chassis contains no user-serviceable comp
viii
Topspin 120 Contents ListThe following contents are included with your Topspin 120 product: ___Accessory Kit___Documentation & CD-ROM Assembly• To
Comments to this Manuals