Cisco Systems MEM-MSFC2-512MB= User Manual download pdf (Page 19)

Supervisor Engine 720 Switch Processor and Route Processor Memory Installation Note

78-15538-02

Installing the SP and RP Memory Upgrade Kit

Figure 9 Clearing the EMI Gasket in a Vertical Slot Chassis

Using the thumb and forefinger of each hand, grasp the two ejector levers, and exert a slight pressure

to the left, deflecting it approximately 0.040 inches (1 mm) creating a small gap between the

supervisor engine’s EMI gasket and the module adjacent to it. (See Figure 9.)

Note Do not exert too much pressure on the ejector levers because they will bend and be damaged.

d. While pressing down on the ejector levers, simultaneously close the levers to fully seat the

supervisor engine in the backplane connector. The ejector levers are fully closed when they are flush

with the module faceplate.

INPUT

FAN

OUTPUT

FAIL

INPUT

FAN

OUTPUT

FAIL

FAN

STATUS

91530

Gap between the module

EMI gasket and the

module above it

1mm

Press left

SUPERVISOR 720 WITH INTEGRATED SWITCH FABRIC.

-S

1 2 ... 14 15 16 17 18 19 20 21 22 23 24 ... 31 32

No comments

Cisco Systems MEM-MSFC2-512MB= User Manual Page 19