Cisco Systems CISCO7206 Quick Start Guide download pdf (Page 24)

6 After Installation

This section contains hardware replacement instructions and information about contacting the Technical Assistance Center.

Note The Flash memory card, Flash Disk, and port adapters support online insertion and removal (OIR).

Replace the Network Processing Engine

1. Power down the router.

2. Disconnect the router from the power source.

3. On the network processing engine (NPE) (1), unscrew the captive installation screws (2).

4. Grasp the handle and pull the NPE from the chassis.

5. Insert the NPE and tighten the captive installation screws.

6. Connect the router to the power source and power up the router.

Also see the Network Processing Engine or Network Services Engine Installation and Configuration publication at

http://www.cisco.com/univercd/cc/td/doc/product/core/7206/fru/npense/index.htm.

Network processing engine

Captive installation screws

57014

NETWORK PROCESSING ENGINE-300

1 2 ... 19 20 21 22 23 24 25 26 27 28 29 30 31 32

No comments

Cisco Systems CISCO7206 Quick Start Guide Page 24