Cisco Systems CF2001P User Manual

SETUP INSTRUCTIONSCF2001P4004-7715-01 © MINOLTA CO., LTD. Printed in JapanPrinterWARNING• Do not plug in the power cord or turn on this unit until you

CF2001P– 9 –4004-7715-016. Fully pull the toner hopper shutter out toward you. Pulling out the toner hopper shutter allows the toner to begin filling

CF2001P– 10 –4004-7715-014. Connecting the Cables1. Make sure that the printer power cord is not plugged into the electrical outlet, and then insert t

CF2001P– 11 –4004-7715-016. Installing the Manual Holder1. Insert the tab on the bottom of the manual holder into the slot in the printer as shown in

CF2001P– 12 –4004-7715-015. Load the prepared A4(C)-size (or Letter(C)-size) plain paper into the paper drawer.6. Slide the adjustable paper guides ag

CF2001P– 13 –4004-7715-01 Setting Up the Converter (7)1. Remove the converter from its box.2. Remove the screw at the bottom of the con-verter, and th

CF2001P– 14 –4004-7715-01 Connecting the Equipment Cables1. Insert a connector on the DTP32 cable (4) into the I/O port on the side of the X-Rite, and

CF2001P– 15 –4004-7715-016. Loosen the screw of the terminal, and then attach the ground wire as shown. 7. Attach the upper cover of the converter.8.

CF2001P– 16 –4004-7715-014. Check that the External Panel Controller appears in the computer screen, and then display the Tech. Rep. Mode screen. (For

CF2001P– 17 –4004-7715-0111. Insert the auto-cal strip into the X-Rite.NOTEInsert the auto-cal strip after “INSERT CALSTRIP” appears on the X-Rite dis

CF2001P– 18 –4004-7715-0115. Feed the test pattern in direction “2” to read the row represented by “B”.When feeding the test pattern to read the row r

CF2001P– 1 –4004-7715-011. Outline of the CF2001P System Setup NOTE• Install and setup each option according to the instructions included with theopti

CF2001P– 19 –4004-7715-0121. Check that “Read the Pattern of Cyan” dis-appears, and that >> appears beside “Read the Pattern of Magenta”.NOTEIf

CF2001P– 20 –4004-7715-018. Making System Setting Checking the Date Setting1. Check that the External Panel Controller appears in the computer screen

CF2001P– 21 –4004-7715-01 Specifying the Serial NumberNOTEBe sure to specify the serial number.When the serial number is specified, the settings for e

CF2001P– 22 –4004-7715-01 Specifying Who Performs ReplacementsNOTEThe message that appears a unit must be replaced can be changed to indicatethat eith

CF2001P– 23 –4004-7715-01 Printing the List1. Prepare A4-size (or Letter-size) plain paper.2. Pull out the paper drawer for Tray 1.3. Press down on th

CF2001P– 24 –4004-7715-0110. Check that the External Panel Controller appears in the computer screen, and then display the Tech. Rep. Mode screen. (Fo

CF2001P– 25 –4004-7715-01 To set the “Energy Save Mode” parameterNOTEWhen making settings according to the customer’s requests, refer to the procedure

CF2001P– 26 –4004-7715-01 To set the “Sleep Mode” parameterNOTEWhen making settings according to the customer’s requests, refer to the proceduredescri

CF2001P– 27 –4004-7715-019. Loading PaperNOTEFor more details about loading paper, refer to the User Manual. Tray 11. Prepare paper that meets this p

CF2001P– 28 –4004-7715-01 Tray 21. Prepare paper that meets this product’s specifications.2. Pull out the paper drawer for Tray 2.3. Press down on the

CF2001P– 2 –4004-7715-012. Unpacking Unpacking the Accessories1. Remove the accessories from the box, and then check that the following are enclosed.

CF2001P– 29 –4004-7715-018. Affix the enclosed paper size label to Tray 2 as shown.9. Affix the enclosed drawer number label as shown.10.Adjusting the

CF2001P– 30 –4004-7715-014. Click [PRT Area].5. Click [Left Margin]. 6. Select the key for the paper drawer that is to be adjusted, and then click the

CF2001P– 31 –4004-7715-01 Adjusting the Paper Reference Position for PF-1181. Check that the External Panel Controller appears in the computer screen,

CF2001P– 32 –4004-7715-0110. Check that the message displayed in the control panel changes from “Alert Printing suspended” to “Info”.11. Exit the Exte

CF2001P– 33 –4004-7715-015. Click [Left Margin].6. Select the key for the third paper drawer, and then click the Start key in the External Panel Contr

CF2001P– 34 –4004-7715-015. Click [Dup. Left Margin].6. Click [1st.].7. Click the Start key in the External Panel Controller. A test page is printed.8

CF2001P– 35 –4004-7715-01 Checking the Hole-Punching Positions for FN-107NOTE• For details on the installing FN-107, refer to its Setup Instructions.•

CF2001P– 36 –4004-7715-01 Setting DT-105 (USA and Canada only)NOTE• For details on installing DT-105, refer to the Setup Instructions included with it

CF2001P– 37 –4004-7715-01<Precautions for Connecting a Telephone to the Data Terminal>• If a telephone is connected to the data terminal, check

CF2001P– 38 –4004-7715-012. Click [Dial Mode].3. Select the dial mode of the user’s telephone line.Push-button... [Tone]Rot

CF2001P– 3 –4004-7715-01 Removing the Protective Tape and Packing Materials<Outside Surface of the Printer>Remove the tape affixed to the outsid

CF2001P– 39 –4004-7715-01<Maintenance Center (Billing Center) Settings>NOTEThe procedure for making Maintenance Center settings are described be

CF2001P– 40 –4004-7715-01<DT Settings>1. Click [ID Code] so that it appears in white on a black background.2. Using the keypad in the External P

CF2001P– 41 –4004-7715-01<Setting the Telephone Number>1. Click [TEL No.] so that it appears in white on a black background.2. Click the Clear k

CF2001P– 42 –4004-7715-01<Initial Transmission>• To perform the initial user registration for the data terminal after the initial settings have

CF2001P– 4 –4004-7715-013. Installing the Units Installing the Imaging Units1. Grasp the handle of the front door, and then carefully swing the door

CF2001P– 5 –4004-7715-017. Remove the protective tape from the imag-ing unit.NOTEThe clear plastic protective sheet is notpacking material; therefore,

CF2001P– 6 –4004-7715-0112. Separate the top and bottom halves of the empty imaging unit cover.NOTESince the bottom half of the imaging unitcover will

CF2001P– 7 –4004-7715-012. Remove the two pieces of tape from the lock levers of the oil-coating unit shown.3. Remove the oil-coating unit from its bo

CF2001P– 8 –4004-7715-01 Filling the TonerNOTE• The toner bottles are not included. A bottle of toner is needed for each color (fourin total) and shou