Cisco Systems PAP2 Troubleshooting Guide download pdf (Page 17)

Phone Adapter with 2 Ports for Voice-over-IP

Chapter 4: Using the Phone Adapter’s Interactive Voice Response Menu

Using the Interactive Voice Response Menu

Check DHCP 100 Use this command to find out if DHCP

has been enabled or disabled. If

enabled, the Phone Adapter will be

automatically assigned an IP address

by your network router or gateway. If

disabled, then the Phone Adapter will

use a static IP address.

Enable/Disable DHCP 101 Enter 1 to enable

Enter 0 to disable

Enable or disable the Phone Adapter’s

DHCP feature. If your network router

or gateway assigns IP addresses, then

enter 1. Otherwise, enter 0.

Check IP Address 110 You will hear the current IP address of

the Phone Adapter.

Interactive Voice Response Menu

Action Command

(press these

keys on the

telephone)

Choices Description

1 2 ... 12 13 14 15 16 17 18 19 20 21 22 ... 45 46

No comments

Cisco Systems PAP2 Troubleshooting Guide Page 17