Cisco Systems VPN 3002 User Manual download pdf (Page 132)

12-6

VPN 3002 Hardware Client Reference

OL-1893-01

Chapter 12 Administration

Administration | System Reboot

Figure 12-6 Administration | System Reboot Screen

Action

Click a radio button to select the desired action. You can select only one action.

• Reboot = Reboot the VPN 3002. Rebooting terminates all sessions, resets the hardware, loads and

verifies the software image, executes system diagnostics, and initializes the system. A reboot takes

about 60-75 seconds. (This is the default selection.)

• Shutdown without automatic reboot = Shut down the VPN 3002; that is, bring the system to a halt

so you can turn off the power. Shutdown terminates all sessions and prevents new user sessions (but

not administrator sessions). While the system is in a shutdown state, the

SYS LEDs blink on the front

panel.

• Cancel a scheduled reboot/shutdown = Cancel a reboot or shutdown that is waiting for a certain

time or for sessions to terminate. (This is the default selection if a reboot or shutdown is pending.)

Configuration

Click a radio button to select the configuration file handling at reboot. These selections apply to reboot

only. You can select only one option.

• Save the active configuration at time of reboot = Save the active configuration to the CONFIG file,

and reboot using that new file.

• Reboot without saving the active configuration = Reboot using the existing CONFIG file and

without saving the active configuration. (This is the default selection.)

1 2 ... 127 128 129 130 131 132 133 134 135 136 137 ... 281 282

No comments

Cisco Systems VPN 3002 User Manual Page 132