Cisco Systems VPN 3002 User Manual download pdf (Page 194)

13-6

VPN 3002 Hardware Client Reference

OL-1893-01

Chapter 13 Monitoring

Monitoring | Live Event Log

This screen shows events in the current event log and automatically updates the display every 5 seconds.

The events might take a few seconds to load when you first open the screen.

Note for Netscape

users:

The live event log requires Netscape version 4.5 or higher. It does not run on other versions of Netscape.

The screen always displays the most recent event at the bottom. Use the scroll bar to view earlier events.

To filter and display events by various criteria, see the Monitoring | Filterable Event Log section above.

Note If you keep this Manager screen open, your administrative session does not time out. Each automatic

screen update resets the inactivity timer. See Session Idle Timeout on the Administration | Access

Rights | Access Settings screen.

Event Time The time of the event: hour:minute:second.millisecond. The hour is based on

a 24-hour clock. For example, 14:37:06.680 identifies an event that occurred

at 2:37:06.680 PM.

Event Severity The severity level of the event; for example: SEV=4 identifies an event of

severity level 4. See Table 9-4 under Configuration | System | Events for an

explanation of severity levels.

Event Class/Number The class—or source—of the event, and the internal reference number

associated with the specific event within the event class. For example:

HTTP/47 indicates that an administrator logged in to the VPN 3002 using

HTTP to connect to the Manager. Table 9-2 under Configuration | System |

Events describes the event classes. The internal reference number assists

Cisco support personnel if they need to examine a log file.

Event Repeat The number of times that this specific event has occurred since the VPN

3002 was last booted or reset. For example, RPT=17 indicates that this is the

seventeenth occurrence of this specific event.

Event IP address The IP address of the client or host associated with this event. Only certain

events have this field. For tunnel-related events, this is typically the “outer”

or tunnel endpoint address. In the Event log format example above,

10.10.1.35 is the IP address of the host PC from which admin logged in using

the Manager.

Event String The string, or message, that describes the specific event. Each event class

comprises many possible events, and the string gives a brief description.

Event strings usually do not exceed 80 characters. In the Event log format

example above, “New administrator login: admin” describes the event.

1 2 ... 189 190 191 192 193 194 195 196 197 198 199 ... 281 282

No comments

Cisco Systems VPN 3002 User Manual Page 194