Cisco Systems VPN 3002 User Manual download pdf (Page 136)

12-10

VPN 3002 Hardware Client Reference

OL-1893-01

Chapter 12 Administration

Administration | Access Rights | Administrators

Administrator

The VPN 3002 has three predefined administrators:

• admin = System administrator with access to, and rights to change, all areas. This is the only

administrator enabled by default; in other words, this is the only administrator who can log in to,

and use, the VPN 3002 Hardware Client Manager as supplied by Cisco.

• config = Configuration administrator with access rights to Quick Configuration and monitoring

management options only.

• monitor = Monitor administrator with rights to monitoring management options only.

Note The VPN 3002 saves Administrator parameter settings from this screen in nonvolatile memory, not

in the active configuration (CONFIG) file. Thus, these settings are retained even if the system loses

power. These settings are also retained even if you reboot the system with the factory configuration

file.

Password

Enter or edit the unique password for this administrator. Maximum is 31 characters. The field displays

only asterisks.

Note The default password that Cisco supplies is the same as the username. We strongly recommend that

you change this password.

Verify

Re-enter the password to verify it. The field displays only asterisks.

Enabled

Check the box to enable, or clear the box to disable, an administrator. Only enabled administrators can

and you can enable all administrators. By default, only admin is enabled.

Apply/Cancel

To save this screen settings in nonvolatile memory, click Apply. The settings immediately affect new

sessions. The Manager returns to the Administration | Access Rights screen.

To discard your settings or changes, click Cancel. The Manager returns to the Administration | Access

Rights screen.

1 2 ... 131 132 133 134 135 136 137 138 139 140 141 ... 281 282

No comments

Cisco Systems VPN 3002 User Manual Page 136