Cisco Systems IOS XR User Manual Page 214

  • Download
  • Add to my manuals
  • Print
  • Page
    / 282
  • Table of contents
  • BOOKMARKS
  • Rated. / 5. Based on customer reviews
Page view 213
Implementing and Monitoring RIB on Cisco IOS XR Software
How to Deploy and Monitor RIB
RC-198
Cisco IOS XR Routing Configuration Guide
How to Deploy and Monitor RIB
To deploy and monitor RIB, you must understand the following concepts:
Verifying RIB Configuration Using the Routing Table, page RC-198 (required)
Verifying Networking and Routing Problems, page RC-198 (required)
Verifying RIB Configuration Using the Routing Table
This task verifies the RIB configuration to ensure that RIB is running on the RP and functioning properly
by checking the routing table summary and details.
SUMMARY STEPS
1. show route [afi-all | ipv4 | ipv6] [unicast | multicast | safi-all] summary
2. show route [protocol [process-id]] [afi-all | ipv4 | ipv6] [unicast | multicast | safi-all] [ip-address
[mask]]
DETAILED STEPS
Verifying Networking and Routing Problems
This task verifies the operation of the routes between nodes.
SUMMARY STEPS
1. show route [protocol [instance]] [afi-all | ipv4 | ipv6] [unicast | multicast | safi-all] [ip-address
[mask]]
2. show route [afi-all | ipv4 | ipv6] [unicast | multicast | safi-all] backup [ip-address]
3. show route [afi-all | ipv4 | ipv6] [unicast | multicast | safi-all] best-local ip-address
4. show route [afi-all | ipv4 | ipv6] [unicast | multicast | safi-all] connected
Command or Action Purpose
Step 1
show route [afi-all | ipv4 | ipv6] [unicast |
multicast | safi-all] summary
Example:
RP/0/RP0/CPU0:router# show route summary
Displays route summary information on the specified
routing table.
The default table summarized is the IPv4 unicast
routing table.
Step 2
show route [protocol [
process-id
]] [afi-all |
ipv4 | ipv6] [unicast | multicast | safi-all]
[ip-ad
dress
[
mask
]]
Example:
RP/0/RP0/CPU0:router# show route ipv4 unicast
Displays more detailed route information on the specified
routing table.
This command is usually issued with an IP address or
other optional filters to limit its display. Otherwise, it
displays all routes from the default IPv4 unicast routing
table, which can result in an extensive list, depending
on the configuration of the network.
Page view 213
1 2 ... 209 210 211 212 213 214 215 216 217 218 219 ... 281 282

Comments to this Manuals

No comments