Cisco Systems 3000 Instruction Manual Page 171

  • Download
  • Add to my manuals
  • Print
  • Page
    / 234
  • Table of contents
  • TROUBLESHOOTING
  • BOOKMARKS
  • Rated. / 5. Based on customer reviews
Page view 170
9-17
Cisco TelePresence System 3000
OL-14521-01
Chapter 9 First-Time Setup
Setting Up CTS Components
d. Press the Right Arrow key and select Normal.
e. Press the Left Arrow key to confirm your selection.
Step 9 Eliminate overscan by completing the following steps:
a. Press the Up Arrow and Down Arrow keys and highlight Picture adj.
b. Press the Right Arrow key and select Picture adj. to enter the Picture Adjustment submenu.
c. Press the Right Arrow key and select Overscan.
d. Press the Left Arrow key and reduce the Overscan value to zero.
e. Press the OK key to complete the Overscan setting.
f. Press the Left Arrow key to confirm your selection.
Step 10 Set the lamp iris by completing the following steps:
a. Press the Up Arrow and Down Arrow keys and highlight Image adj.
b. Press the Right Arrow key and select Image adj. to enter the Image Adjustment submenu.
c. Press the Up Arrow and Down Arrow keys and highlight Advanced menu.
d. Press the Right Arrow key and select Advanced menu.
e. Press the Up Arrow and Down Arrow keys and highlight Lamp iris.
f. Press the Right Arrow key and select Lamp iris.
g. Press the Right Arrow key and select Open.
h. Press the OK key to complete the selection.
i. Press the Left Arrow key to confirm your selection.
j. Press the Up Arrow and Down Arrow keys and highlight Store.
k. Press the Right Arrow key and select Store.
The first of four icons should be highlighted.
l. Press the OK key.
An arrow should point to Ye s.
m. Press the OK key.
The icons for an open door should be highlighted.
n. Press the OK key.
Store should be highlighted.
o. Press the Left Arrow key to complete the Image adj. function.
p. Press Menu to exit the menu.
Step 11 Set the lens iris by completing the following steps:
a. From the main menu, use the Up Arrow and Down Arrow keys to highlight the Image Adj function.
Press the Right
Arrow key to select the Image Adj sub-menu.
b. Use the up and Down Arrow keys to select Lens Iris.
c. Press the Right Arrow key to display the lens value setting tool. Press the Right Arrow until you
reach 0, then press OK to return to the Image Adj submenu.
d. Press the Left Arrow key to return to the main menu.
Page view 170
1 2 ... 166 167 168 169 170 171 172 173 174 175 176 ... 233 234

Comments to this Manuals

No comments